In today’s homes, folding sliding doors have become a much needed piece of furniture. Numerous companies out there are offering these products, but before you spend the hard earned money, here are few things you must consider.
Doors are usually made from aluminium or timber. However timber doors are lot more in style and are tactile. Plus they are manufactured out of resources that are renewable and are very efficient energy-wise.
Construction is of primary concern. Most doors are butt joined in most companies. In this technique, members are first cut to the appropriate size and then numerous holes are drilled to the surface that joins the doors. Precise holes can be drilled with the use of a dowelling jig. Into corresponding holes of each adjoining member, dowels are glued. Then the joint is clamped. This is done until all the glue dries off. Although the dowel offers hold, with time they will probably shrink and loosen up. Eventually the joint will flex and perhaps later it may come away.
Therefore doors with dowel joints should be less preferred. Go for doors that are made by using traditional techniques like comb or tenon and mortoise joints.
The glasses used on folding sliding doors are of a variety of grades. Most often people inquire about the glasses U value after having checked with their architect about it. However since different manufacturers use different types, it is advisable to use a glass that is tough. Be it for safety or the security of your home, check the glasses “EN” number. This will give an indication of its abilities against an impact by a pendulum. Therefore it will give you some assurance with regard to people who may want to smash up the glass.
Well then. the next problem to tackle is, just think about the number of times that this folding sliding door is going to open and close.
Especially if it’s got rollers as well, you may definitely wonder whether the door is going to work this good even for the next three years. This is why a number of top quality manufacturers use a hinge by the name of “Centor.” For a more olden look, this stainless steel hinge can also be made of brass.
Then coming to the issue of locks; the traditional dead bolt systems are now being replaced by multi lever or multi point locks as per the request of a number of insurance companies. Also it is best to buy from manufacturers closer to home. This is because, doors are produced in large quantities and pre defined sizes. If the door you have ordered does not fit for some reason or the other you are then forced to depend on a manufacturer who will be transporting your product over many 1000s of miles. Due to the extensive traveling, paint scratches, dents and cracks on the glass may occur and are often.
The obvious advantage with folding sliding doors is that they don’t take up space in front for opening
